Heavy Duty 8 way multi-switch<
Heavy Duty 8 way multi-switch. This is the way to enable a Dual LNB system to support up to 8 receivers. Both lines from the LNB on the Dish MUST be connected to the switch. This unit has a VHF/UHF signals input allowing the mixing of DIRECTV signals and Local Channels in select markets onto one cable. This unit can also use a power supply sold separately.Appearance and branding of this Multi-Switch may vary. |
|
|
|
|
|
Install diagram for a 8 way multiswitch. This unit can be use with diplexer when using a local antenna or local cable. Or without. In the case of a regular satellite only installation the wires from the switch would connect
directly to each receiver. Keep in mind in a TiVo installation that 2 wires from the switch will connect to each TiVo receiver.
Keep in mind in a TiVo installation that 2 wires from the switch will connect
to each TiVo receiver.
|