|
This is a receiver only. It will have a
separate descrambler and dish positioner - It is the same as a 324 but has
stereo capabilities)
BUTTONS ON THE RECEIVER
- Power - On or Off
- Mono/Stereo A and B - (A) down, (B) up for Mono. Both down for Stereo.
- Matrix/Discrete - Down for Matrix, Up for Discrete.
- Format - Used to select Horizontal or Vertical polarity.
- Scan (probably on bottom of receiver) - Used to scan channel range when
aiming the antenna.
KNOBS ON THE RECEIVER
- Audio A and B - Used to adjust the audio subcarrier frequency. Indicator
lights show active control.
- Fine Tune - Used to adjust the fine tuning on a channel.
- Channel Selector w/display - Use to change channels.
- Polarity - Use to adjust the skew.
|
