DirecPC Support
Table of Contents

Outdoor Installation

  1. Antenna Components
  2. Conventions Used in the Guide
  3. Safety Information
  4. Introduction
  5. Locating the Satellite
  6. Choosing the Antenna Installation Site
  7. Selecting a Mounting Option
  8. Installing the Antenna onto Wood Siding
  9. Installing the Antenna onto Brick or Masonry
  10. Installing the Cap Mount onto the Antenna Reflector
  11. Installing the Antenna/Cap Mount onto the Mast
  12. Installing Feed Assembly and Feed Support Tube onto Reflector
  13. Grounding the Antenna Base Plate
  14. Installing and Routing the LNB Cable
  15. Connecting the Coaxial Cable to the LNB
  16. Attaching the LNB Cable onto the DirecPC Adapter
  17. Pointing the Antenna - Setup
  18. Loosening the Nuts and Bolts
  19. Setting the Polarization
  20. Setting the Elevation
  21. Approximate Azimuth Setting
  22. The Alignment Procedure
  23. Final Adjustments After the Satellite is Detected

Indoor Installation

  1. Indoor Hardware  
  2. Satellite Receiver Adapter - Driver Installation
  3. Networking - Installing a Network Interface Card
  4. How to setup and configure Internet Connection Sharing with your satellite receiver adapter
  5. Software Installation - Common Problems
  6. Software Installation - Auto Setup